User`s manual

5
M10 Locknut
(65)–2
M8 Locknut
(10)–4
M8 Split
Washer (42)–3
M8 Washer
(54)–4
M6 Washer
(68)–8
M6 Locknut
(63)–4
M4 x 5mm
Self-tapping
Screw (66)–2
M4 x 8mm
Screw (29)–2
M6 x 35mm Button
Screw (61)–8
M10 x 70mm Carriage Bolt (30)–2
M10 x 65mm Button Screw (33)–2
M8 x 20mm Button
Screw (34)–3
M6 Curved
Washer (69)–4
M4 Washer
(70)–2
M6 x 30mm Button
Bolt (64)–4
M8 x 125mm Bolt (62)–2
M8 Curved
Washer (46)–2
M4 x 15mm
Self-tapping
Screw (47)–4
M8 x 65mm Button Bolt (36)–2
ASSEMBLY
T
o hire an authorized service technician to assemble the exercise bike, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver , an adjustable
wrench , and pliers .
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.