® USER'S MANUAL Model No. WLEX19820 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID DELAYS, PLEASE CALL DIRECT TO OUR TOLLFREE CUSTOMER HOT LINE. The technicians on our customer hot line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ............................................................. BEFORE YOU BEGIN ................................................................... ASSEMBLY ........................................................................... HOW TO OPERATE THE EXERCISE CYCLE ................................................. MAINTENANCE AND TROUBLESHOOTING ................................................. CONDITIONING GUIDELINES ..................................................
BEFORE YOU BEGIN Congratulations for selecting the new WESLO _ PURSUIT 510 CS exercise cycle. Cycling is one of the most effective exercises for increasing cardiovascular fitness, building endurance, and toning the body. The PURSUIT 510 CS exercise cycle offers a selection of features designed to let you enjoy this healthful exercise in the convenience and privacy of your home. Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tools, assembly requires a Phillips screwdriver wrenches _, _ _, two adjustable and pliers _. Use the part drawings below to identify the small parts used in assembly.
1. Whileanotherpersonliftsthefrontofthe Frame(1) slightly,attacha Stabilizer(2)withtwoMIOx 65mm CarriageBolts(30)andtwo MIONylonLocknuts(33). 1 30 2 Attacha Stabilizer(2)to theSeatFrame(5)withtwo MIOx 65mmCarriageBolts(30)andtwo MIONylon Locknuts(33). 33 Inserttheendofthe SeatFrame(5)intothe Frame (1).Next,firmlypresstheSeatFrameBushing(20) intothe Frame.Securethe SeatFrameBushingto the FramewithtwoM4x 5mmScrews(65).Tightenthe Adjustment Knob(9)intothe Frame.
Attacha SeatHandle(50)tothe roundtubeonthe LeftSeatBracket(52)withtwoM6x 32mmBolts(62) andtwo M6NylonLocknuts (63). Attachthe otherSeatHandle(50)to theRightSeat Frame(53)in thesameway. _0 53 50 Attachthe Backrest(54)tothe SeatBrackets(52,53) withfourM6x 38mmScrews(60)andfourM6 Washers(61). Seestep4.TightenthetwoM8NylonLocknuts(10). 54 \ 52 53 61 61 7. AttachtheSeat(12)tothe SeatBrackets(52,53)with fourM6x 38mmScrews(60)andfourM6Washers (61).
TheConsole(16)requiresthreeAAbatteries(not included);alkalinebatteriesarerecommended. Insert threebatteriesintothe Consoleas shown.Makesure thatthe batteriesareorientedas shownby the markingsinsidethe Console. 8 _Batteries ,, ..... HoldtheConsole(16)nearthe Handlebar (15).Insert theconsolewiredownthroughtheindicatedholein the Handlebar. Note:Theconsolewireis longerthan shown. )6 Hol __ e__j_ ___1 .; Attachthe Console(16)tothe Handlebar (15)with fourM4x 16mmScrews(49).
11. Identify the Left Pedal (24), which is marked with an "L." Using an adjustable wrench, firmly tighten the Left Pedal counterclockwise into the left arm of the Crank (21). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank. Important: Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For best performance, the Pedals must be kept tightened.
FEATURES OF THE CONSOLE 2. Select one of the modes: The easy-to-use console features five modes that provide instant exercise feedback during your workouts. The modes are described below. Scan mode-When the power is turned on, the scan mode will be selected automatically. A mode indicator will appear below the word "SCAN" to show that the scan mode is selected, and a second Mode Indicators _-w,,m I[J! W,,_ DISTANCE mode indicator will show which mode is currently displayed.
MAINTENANCE AND TROUBLESHOOTING Inspect and properly tighten all parts of the exercise cycle regularly. Replace any worn parts immediately. Next, turn the resistance knob to the lowest setting (see HOW TO ADJUST THE PEDALING RESISTANCE on page 8). To clean the exercise cycle, use a damp cloth and a small amount of mild detergent. Important: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. In order to adjust the reed switch, the left side shield must be removed (see HOW TO ADJUST THE RESISTANCE STRAP on page 10). With the left side shield removed, locate the Reed Switch (43). Turn the Crank (21) until the Magnet (38) is aligned with the Reed Switch. Loosen, but do not remove, the M4 x 16mm Screw (49). Slide the Reed Switch slightly closer to or away from the Magnet.
CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that proper nutrition and adequate rest are essential for successful results. ber in your training zone as you exercise. For maximum fat burning, adjust the intensity of your exercise until your heart rate is near the middle number in your training zone as you exercise. Aerobic Exercise WARNING: Before beginning this or any exercise program, consult your physician.
EXERCISE FREQUENCY workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is make exercise a regular and enjoyable part of your everyday life. To maintain or improve your condition, plan three workouts each week, with at least one day of rest between SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch--never bounce. 1.
EXPLODED DRAWING-Key No. Qty. Model No. WLEX19820 Description Key No. Qty.
EXPLODED DRAWING-- Model No. WLEX19820 Roao2A 49 58 18 59 21 34.
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
