Owner's Manual

M10 Locknut

(32)–6

M10 Washer

(10)–6

M8 Locknut

(27)–6

M8 Split

Washer (8)–10

M4 x 20mm

Self-tapping

Screw (45)–2

M4 x 20mm

Screw (93)–6

M8 x 16mm

Screw (35)–4

M10 x 76mm

Bolt (30)–2

M8 x 82mm

Screw (53)–4

M8 x 78mm Bolt (38)–2

M8 x 20mm

Screw (7)–3

M8 x 36mm

Bolt (22)–4

M3 x 20mm

Screw (79)–4

M8 Washer

(71)–10

M4 x 16mm

Screw (2)–4

M10 x 45mm

Bolt (39)–4

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the

key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled.