Owner's Manual

3. If there is a cardboard tube (not shown) on the

front the Frame (54), remove and discard the

attachment screw and the cardboard tube.

Set a sturdy piece of packing material under the

front of the Frame (54). Have a second person

hold the Frame to prevent it from tipping

while you complete this step.

Attach the Front Stabilizer (37) to the Frame (54)

with two M8 x 82mm Screws (53), two M8 Split

Washers (8), and two M8 Washers (71).

Remove the packing material.

4. Orient the Right Pedal (76) as shown.

Attach the Right Pedal (76) to the Right Pedal

Arm (75) with two M10 x 45mm Bolts (39), two

M10 Washers (10), and two M10 Locknuts (32).

Attach the Left Pedal (not shown) to the Left

Pedal Arm (not shown) in the same way.

5. Attach the Right Pedal Arm Cover (85) to the

Right Pedal Arm (75) with an M4 x 20mm Self-

tapping Screw (45).

Repeat this step on the other side of the

elliptical.