Owner's Manual

9
38
35
8
8
27
71
71
83
83
71
16
26
Avoid pinching
the wires
6a
6a. Orient the Upright (9) and the Lower Upright
Cover (83) as shown. Slide the Lower Upright
Cover upward onto the Upright.
Have a second person hold the Upright (9) and
the Lower Upright Cover (83) near the Frame
(54). Connect the Extension Wire (16) to the
Main Wire (26).
Tip: Avoid pinching the wires. Slide the
Upright (9) onto the Frame (54).
6b. Attach the Upright (9) to the Frame (not shown)
with two M8 x 78mm Bolts (38), two M8 Split
Washers (8), two M8 Washers (71), and two M8
Locknuts (27). Make sure that the Locknuts
are inside the hexagonal holes. Do not fully
tighten the Bolts yet.
Then, attach the Upright (9) with four M8 x
16mm Screws (35), four M8 Split Washers (8),
and four M8 Washers (71). Do not fully tighten
the Screws yet.
Slide the Lower Upright Cover (83) downward
to the Frame (54). Do not press the Lower
Upright Cover into place yet.
9
9
54
Hexagonal
Holes
35
6b