Owner's Manual

13
FEATURES OF THE CONSOLE
The easy-to-use console features seven displays that
provide instant exercise feedback during your work-
outs. The displays are described at the right.
Scan—This mode shows the time, speed, distance,
calories, odometer, and pulse displays, for a few
seconds each, in a repeating cycle. Note: The pulse
display will appear only while you are using the heart
rate monitor.
Time—This display shows the elapsed time. Note: If
you set a time goal (see step 2 on page 14), this
display will show the time remaining in your workout.
Speed—This display shows your pedaling speed, in
miles per hour.
Distance (Dist)—This display shows the distance you
have pedaled during your workout, in miles.
Note: If you set a distance goal (see step 2 on page
14), this display will show the distance remaining in
your workout.
Calories (Cal)—This display shows the approximate
number of calories you have burned during your work-
out. Note: If you set a calorie-burning goal (see step
2 on page 14), this display will show the number of
calories still to be burned in your workout.
Odometer (Odo)—This display shows the total dis-
tance pedaled since the odometer was last reset.
Note: To reset the odometer, remove the batteries from
the console and then reinsert them.
Pulse—This display shows your heart rate in beats per
minute when the console detects your pulse. When no
pulse is detected, a P will appear in the display.
Note: If you set a pulse goal (see step 2 on page
14), when your goal is reached, a tone will sound for
several seconds.