Owner's Manual

7
2. Identify the Rear Stabilizer (10), which has a
leveling dial on each end.
Set a sturdy piece of packing material under the
rear of the Frame (1). Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Attach the Rear Stabilizer (10) to the Frame (1)
with two M8 x 92mm Screws (50) and two M8
Curved Washers (51).
Remove the packing material.
10
50
51
2
1
Leveling
Dial
3. If there is a cardboard tube (not shown) on the
front the Frame (1), remove and discard the
attachment screw and the cardboard tube.
Set a sturdy piece of packing material under the
front of the Frame (1). Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Attach the Front Stabilizer (9) to the Frame (1)
with two M8 x 92mm Screws (50) and two M8
Curved Washers (51).
Remove the packing material.
1
3
9
50
51