Owner's Manual

8
4
4. While a second person holds the Upright (3)
near the Frame (1), connect the Extension Wire
(38) to the Reed Switch Wire (26).
Next, connect the Resistance Cable (24) to the
Lower Resistance Cable (27) in the following
way:
 •See drawing A. Pull upward on the metal
bracket on the Lower Resistance Cable (27),
and insert the tip of the Resistance Cable (24)
into the wire clip inside the metal bracket.
 •See drawing B. Firmly pull the Resistance
Cable (24) upward and slide it into the top of
the metal bracket.
 •See drawing C. Using pliers, squeeze the
prongs on the upper end of the metal bracket
together.
Insert the wires and cables into the Frame (1).
Tip: Avoid pinching the wires and cables.
Slide the Upright (3) onto the Frame (1). Attach
the Upright with four M8 x 20mm Screws (52)
and four M8 Curved Washers (51).
Avoid pinching the
wires and cables
38
52
52
51
51
26
27
3
1
24
A
B
C
27
24
24
Metal
Bracket