Owner's Manual

8
7
Battery Cover
Batteries
16
7. The Console (16) can use four 1.5V D batteries
(not included); alkaline batteries are recom-
mended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components. Remove the battery cover, insert
the batteries into the battery compartment, and
then reattach the battery cover. Make sure to
orient the batteries as shown by the diagram
inside the battery compartment.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console, use
only a manufacturer-supplied power adapter.
Plug one end of the power adapter into the jack
on the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
12
55
55
55
7
6
49
2
49
6. Have another person hold the Seat Frame (7)
under the Rear Frame (2) as shown.
A
ttach the Seat Frame (7) and the Seat (12) to
the Rear Frame (2) with four M6 x 42mm Button
Screws (49) and four M6 Washers (55).
S
ee step 4. Tighten the two M8 x 70mm Button
Bolts (54).
See step 5. Tighten the four M6 x 38mm Patch
Screws (48).