Owners manual

5. Using a plastic bag to keep your fingers clean,

apply a generous amount of the included grease

to the Frame Bushings (30) in the top of the

Frame (14).

Next, identify the Right Handlebar (12). Insert

the Right Handlebar into the right side of the

Frame (14) as shown, and then attach it with an

M8 x 25mm Screw (3).

Then, tighten a Stop Screw (17) into the Right

Handlebar (12).

Attach the Left Handlebar (2) to the left side

of the Frame (14) in the same way.

Grease

6. Orient a Grip (15) as shown, press the pin (A),

and then insert the Grip into the right side of the

Frame (14); make sure that the pin is in the

indicated hole (B) in the Frame.

Attach the other Grip (15) to the left side of

the Frame (14) in the same way.