Owner's Manual

6
1
.
Insert the Rear Stabilizer (6) into the Frame (1).
A
ttach the Rear Stabilizer with four M8 x 60mm
Button Screws (30).
6
30
1
2. Orient the Front Stabilizer (2) with the large
holes facing the Frame (1). Attach the Front
Stabilizer to the Frame with two M8 x 73mm
Button Screws (33).
1
1
2
33
2
Large
Holes
T
o make assembly easier, read the
information on page 5 before you begin
a
ssembling the exercise cycle.
3. Attach the Seat (12) to the Seat Post (5) with
four M8 Split Washers (42) and four M8
Locknuts (10). Note: The Split Washers and
the Locknuts may be preattached to the
underside of the Seat.
3
12
5
42
42
42
10
10