Owner's Manual

13. Identify the Left Pedal (24), which is marked

with an “L.”

Using an adjustable wrench, firmly tighten the

Left Pedal (24) counterclockwise into the left

arm of the Crank (21).

Tighten the Right Pedal (not shown) clockwise

into the right arm of the Crank (not shown).

Adjust the strap on the Left Pedal (24) to the

desired position, and press the end of the strap

onto the tab on the Left Pedal. Adjust the

strap on the Right Pedal (not shown) in the

same way.

14. Make sure that all parts are properly tightened before you use the exercise bike. After assembly is

completed, some extra parts may be left over. Place a mat under the exercise bike to protect the floor.

12. While a second person holds the Console (16)

near the Upright (13), connect the wire on the

onsole to the Extension Wire (52).

Insert the wires downward into the Upright (13).

Tip: Avoid pinching the wires. Attach the

Console (16) to the Upright (13) with four M4 x

15mm Self-tapping Screws (47).

void pinching

the wires

Tab

Strap