Owner's Manual

8
8. Have a second person hold the Upright (13)
near the Frame (1) until step 9.
Connect the Extension Wire (52) to the Reed
Wire (43).
Then, connect the Resistance Cable (19) to the
Lower Resistance Cable (45) in the following
way:
• See drawing A. Pull upward on the metal
bracket on the Lower Resistance Cable (45),
and insert the tip of the Resistance Cable (19)
into the wire clip inside the metal bracket.
• See drawing B. Firmly pull the Resistance
Cable (19) upward and slide it into the top of
the metal bracket.
• See drawing C. Using pliers, squeeze the
prongs on the upper end of the metal bracket
together.
A
B
C
45
19
19
Metal
Bracket
Metal
Bracket
1
13
45
19
52
8
43
7. Attach the Seat (12) to the Seat Brackets (14,
15) with four M6 x 35mm Button Screws (61)
and four M6 Washers (68).
7
12
68
61
68
68
15
14
61