Instructions / Assembly

10
6. While a second person holds the Upright (35)
near the Frame (23), connect the Upright Wire
(36) to the Reed Switch Wire (7).
Next, push the Lower Resistance Cable (34)
upward into the Upright (35), and then pull the
end of the Lower Resistance Cable out of the
indicated hole.
6
7
7. Insert the excess wire and cable into the
Frame (23).
Tip: Avoid pinching the wire and the cable.
Slide the Upright (35) onto the Frame (23).
Attach the Upright (35) with four M8 x 16mm
Screws (22) and four M8 Curved Washers (17);
start all the Screws, and then tighten them.
Avoid pinching
the wire and
the cable
35
Hole
35
34
7
22
17
17
22
23
23
36