Instructions / Assembly

8. The Console (21) can use two AA batteries (not

included); alkaline batteries are recommended.

Do not use old and new batteries together or

alkaline, standard, and rechargeable batter-

ies together. IMPORTANT: If the Console has

been exposed to cold temperatures, allow

it to warm to room temperature before you

insert batteries. Otherwise, you may damage

the Console or other electronic components.

Remove the battery cover from the back of the

Console (21), and insert batteries into the battery

compartment. Make sure to orient the bat-

teries as shown by the diagram inside the

battery compartment. Then, reattach the bat-

tery cover.

Battery

Compartment

9. While a second person holds the Console

(21) near the Frame (2), connect the wire on

the Console to the Frame Wire (11). Insert the

excess wire into the Frame.

Tip: Avoid pinching the wires. Attach the

Console (21) to the Frame (2) with four

M4 x 16mm Screws (22); start all the Screws,

and then tighten them.

10. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.

Place a mat under the rower to protect the floor.

Avoid pinching

the wires