weslo.com Model No. WLTL29816.6 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.weslo.com. CUSTOMER CARE For service at any time, go to wesloservice.com. Or call 1-866-699-3756 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–12 p.m. MT Please do not contact the store. CAUTION Read all precautions and instructions in this manual before using this equipment.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 12.
able to safely lift 45 lbs. (20 kg) to move the treadmill. 19. Always stand on the foot rails when starting or stopping the walking belt. Always hold the handrails while using the treadmill. 26. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. Do not operate the treadmill while it is folded. 20. When a person is walking on the treadmill, the noise level of the treadmill will increase. 21.
STANDARD SERVICE PLANS all 5
BEFORE YOU BEGIN Thank you for selecting the new WESLO® CADENCE R 5.2 treadmill. The CADENCE R 5.2 treadmill offers a selection of features designed to make your workouts at home more effective. And when you’re not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may be included. M4.
ASSEMBLY • To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.
3. Set the console assembly (A) face down on a soft surface to avoid scratching the console assembly. 3 D E C Identify the Right Handrail (69), which has a large hole (B) in the location shown. Hold the Right Handrail near the console assembly (A). B 69 Next, insert the console wire (C) into the large hole (B) in the side of the Right Handrail (69). Using needlenose pliers, carefully grip the connector (D) and pull the console wire out of the hole near the bracket (E) on the Right Handrail. A 4.
5. With the help of a second person, hold the console assembly (A) near the Right Upright (74). Remove the tie (F) from the Upright Wire (71). 5 A See the inset drawing. Connect the Upright Wire (71) to the console wire (G). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER.
7. Start an M8 x 15mm Screw (2) with an M8 Star Washer (36) into each Upright (73, 74). 7 Firmly tighten all six M8 x 15mm Screws (2). 2 2 36 73 2 74 2 8. Attach the Storage Latch (42) to the Left Upright (73) with two #10 x 1" Tek Screws (7); start both Tek Screws, and then tighten them. 36 8 73 42 7 9. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill.
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for lowpower devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. IMPORTANT: If the treadmill is connected to an AFCI-equipped outlet and your circuit breaker trips repeatedly when the treadmill is used, see the front cover of this manual to purchase an arc filter.
CONSOLE DIAGRAM Thumb Heart Rate Monitor Clip Key To turn on the power, see page 14. To use the manual mode, see page 14. To use a preset workout, see page 16. To connect your tablet to the console, see page 17. To connect your heart rate monitor to the console, see page 17. To change the incline of the treadmill, see page 18. FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective and enjoyable.
HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 12). Next, locate the power switch on the treadmill frame near the power cord. Make sure that the switch is in the reset position. To start the walking belt, press the Start button.
The lower left display—As you exercise, the lower left display can show the elapsed time and the distance that you have walked or run. Note: When a preset workout is selected, the lower left corner of the display will show the time remaining in the workout instead of the elapsed time. 5. Measure your heart rate if desired. You can measure your heart rate using either the thumb heart rate monitor or a compatible heart rate monitor.
HOW TO USE A PRESET WORKOUT To stop the workout temporarily, press the Stop button. The time will begin to flash in the display. To restart the workout, press the Start button. The walking belt will begin to move at 1 mph. When the next segment begins, the treadmill will automatically adjust to the speed setting programmed for the next segment. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 14. 2. Select a preset workout.
HOW TO CONNECT YOUR TABLET TO THE CONSOLE 5. Disconnect your tablet from the console if desired. The console supports BLUETOOTH connections to tablets via the iFit Bluetooth Tablet app and to compatible heart rate monitors. Note: Other BLUETOOTH connections are not supported. To disconnect your tablet from the console, first select the disconnect option in the iFit Bluetooth Tablet app. Then, press and hold the iFit Sync button on the console until the LED on the console turns solid green. 1.
HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, you can change the incline of the treadmill. There are two incline levels. Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 19). Incline Feet To change the incline, rotate both incline feet to the desired position. CAUTION: Before using the treadmill, make sure that both incline feet are in the same position and are held firmly in place.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch plate is resting against the latch pin. Moving the treadmill may require two people. 1.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown, the switch has tripped. To reset the power switch, wait for five minutes and then press the switch back in. Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the treadmill is used. Replace any worn parts immediately.
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifications described on page 12. a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4 6 30 2 4 2 2 4 5 1 8 4 4 2 2 1 2 2 2 2 4 2 4 2 14 4 2 2 2 2 1 2 3 2 2 6 1 1 1 2 2 1 2 1 1 1 Model No. WLTL29816.6 R0717A Description Key No. Qty. M10 x 65mm Screw M8 x 15mm Screw M4.2 x 19mm Screw M8 x 35mm Screw M4.2 x 13mm Washer Head Screw M5 x 16mm Screw #10 x 1" Tek Screw M4.2 x 19mm Tek Screw M4.2 x 19mm Washer Head Screw M4.
14 53 34 43 21 3 23 55 4 37 87 12 19 54 38 25 3 88 3 25 14 40 3 26 43 21 19 12 3 23 3 25 3 26 82 4 88 51 87 3 25 52 34 85 41 39 3 25 50 13 25 3 48 88 87 25 3 12 47 5 49 3 5 40 26 25 3 46 30 24 26 45 31 25 3 13 80 12 3 16 81 41 24 87 88 25 5 10 30 5 EXPLODED DRAWING A Model No. WLTL29816.
EXPLODED DRAWING B Model No. WLTL29816.
EXPLODED DRAWING C Model No. WLTL29816.
EXPLODED DRAWING D 67 Model No. WLTL29816.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.