Manual

DIAGRAM OF THE CONSOLE

WESLO

Speed Control Monitor Display

u _.WARNING:

Clip--

ON OFF

Pulse Incline Control

BATTERY INSTALLATION

The console requires two "AA" batteries (not in-

cluded). Alkaline batteries are recommended. To in-

stall batteries, open the battery cover as shown below.

Press two batteries into the battery compartment, with

the negative (-) ends of the batteries touching the

springs. Close the battery cover, push up on the tab,

and then push the tab forward as shown. Be sure that

the tab locks into place.

Battery Cover

Battery

Cover Tab

STEP BY STEP CONSOLE OPERATION

Step onto the foot rails of the treadmill. Find the clip

attached to the key (see the drawing above), and slide

the clip onto the waistband of your clothing. Follow the

steps below and on page 9 to operate the console.

Insert the key fully into the power switch.

Note: Inserting the key

will not turn on the dis-

play. The display will

turn on when the

ON/RESET button is

pressed or when the

walking belt is started.

(If you just installed

, OS

batteries, the display will already be on.)