Owner's Manual

11. Orient the Latch Pin Assembly (68) so that the

knob is on the indicated side. Attach the Latch

Pin Assembly with the Latch Spacer (82) to the

Left Upright (66) with two #10 x 1 1/2" Screws

(8). Start both Screws, and then tighten them.

Be careful not to overtighten the Screws.

12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic

on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill.

Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used

to adjust the walking belt (see pages 21 and 22).

Knob

10. Identify the Left and Right Upper Body

Arms (84, 85).

Make sure that the Left Upper Body Arm (84)

is positioned as shown. Attach the Left Upper

Body Arm to the Left Upright (66) with two 1/4" x

3 1/2" Screws (56), two 1/4" Star Washers (23),

and two 3/8" Star Washers (3) as shown. Do not

overtighten the Screws.

Attach the Right Upper Body Arm (85) as

described above.