Manual

mfyoupurchasetheoptionaJchestpuJsesensor(seepage20),followthestepsbelowto installthere-
ceiverandtheshortjumperwireincJudedwiththechestputsesensor.
1, Makesurethatthepowercordis unpJugged.Remove
theindicated3/4"Screw(6)andtheAccessDoor(94)from
thebackoftheConsoUeBack(95),
2, Removethepaperfromtheadhesivepadonthebackof
thereceiver(A),Holdthereceiversothesmallcylin-
deris neartheJoweredge of the receiver and is fac-
ing the Console (88) as shown. FirmUypress the re-
ceiver onto the indicated corner of the Access Door (94),
Connect the wire on the receiver to the indicated wire ex-
tending from the ConsoUe,
3, Make sure that no wires are pinched. Reattach the
Access Door (94) with the 3/4" Screw (6), The other wires
included with the receiver may be discarded,
108