Specification Sheet

ManualsBrandsWeslock Door Hardware ManualsPocket Door LocksWeslock Pocket Door Passage Pull

Table Of Contents

2008

Fold

WATERFORD LEVERMONOGHAN LEVER

CARLOW LEVER

Rosettes

Round

Premiere

Sutton

Knob & Lever Features

• Cylindrical Door Locks

• Meets ANSI A 156.2 Grade II lock standards

• 5-pin Cylinder

• Removable knobs/levers prevents scratching during installation

• Panic-Proof Keylock/Privacy - one turn of interior knob/lever

unlocks & opens door

• Push Button locking in Rosette

• Weslock Keyway standard (Optional Schlage Keyway)

• Solid Molten Bronze Levers, Knobs & Rosettes

•ADA compliant levers

Knob & Lever Speciﬁcations

• Adjustable Latches 2-3/8” or 2-3/4” with removable faceplates

• Fits doors prepared with 2-1/8” cross hole & 1” edge hole

• Adjusts to door thickness from 1-3/8” to 1-3/4”

• Optional door thickness from 1-3/4” to 2-1/4”

Knob & Lever Warranty

• Limited Lifetime Mechanical Warranty

• Limited 10 Year Finish Warranty

DURHAM KNOBWEXFORD KNOB

Molten Bronze Collection

KNOBS & LEVERS

Molten Bronze Collection

ENTRY HANDLES & DEADBOLTS

Round

Premiere

Entry Handle Features

• Meets ANSI A 156.2 Grade II lock standards

• 5-pin Cylinder

• Removable knobs/levers prevents scratching

during installation

• Weslock Keyway standard (Optional Schlage Keyway)

• Solid Molten Brass

• 1” throw deadbolt with two hardened steel rollers -

prevents sawing

• Interconnect option for Stonebriar/Wiltshire

Entry Handle Speciﬁcations

• Adjustable Latches 2-3/8” or 2-3/4” with

removable faceplates

• Adjusts to door thickness from 1-3/4” to 2”

• Optional door thickness from 2” to 2-1/4”

- Castletown

• Fits doors prepared with 2-1/8” top and 2-1/8” bottom

cross holes & 1” edge hole

• 5-1/4” minimum center to center cross hole spacing

- Stonebriar/Wiltshire/Tramore

• Fits doors prepared with 1-5/8” top and 2-1/8” bottom

cross holes & 1” edge hole

• 5-1/2” center to center cross hole spacing

Entry Handle Warranty

• Limited Lifetime Mechanical Warranty

• Limited 10 Year Finish Warranty

Deadbolt Features

• 5-pin Cylinder

• 1” throw deadbolt with two hardened steel rollers

• Heavy duty security strike with 3” screws

• Weslock Keyway standard (Optional Schlage Keyway)

Deadbolt Speciﬁcations

• Adjustable latches 2-3/8” or 2-3/4” with

removable faceplates

• Fits doors prepared with 2-1/8” cross holes and

1” edge hole

• Adjusts to door thickness from 1-3/8” to 2”

• Optional door thickness from 2” to 2-1/4”

Deadbolt Warranty

• Limited Lifetime Mechanical Warranty

• Limited 10 Year Finish Warranty

STONEBRIAR

TRAMORE

CASTLETOWN

WILTSHIRE

800.575.2658

www.weslock.com

Finishes

Oil Rubbed Bronze (1)

Weathered Pewter (P)

*Rust (R)

*Sandstone (H)

*Black (2)

*Special Order Only

Finishes

Oil Rubbed Bronze (1)

Weathered Pewter (P)

*Rust (R)

*Sandstone (H)

*Black (2)

*Special Order Only

Summary of content (14 pages)

PAGE 1
Fold Molten Bronze Collection KNOBS & LEVERS 2008 Molten Bronze Collection ENTRY HANDLES & DEADBOLTS Entry Handle Features WEXFORD KNOB • Meets ANSI A 156.
PAGE 2
Molten Bronze Collection ENTRY HANDLES & DEADBOLTS Molten Bronze Collection KNOBS & LEVERS Grade II design for extra strength and security. Push button locking in rosette. Grade II cylindrical design for extra strength and security. 2008 Panic proof. One turn of the knob/lever unlocks and opens the door. Solid molten bronze material. Removable faceplates allow for radius or square latches (drive-in latch available). Solid molten bronze rosettes, knobs and levers.
PAGE 3
Fold Elegance Collection KNOBS & LEVERS 2008 Elegance Collection ENTRY HANDLES & DEADBOLTS Entry Handle Features IMPRESA TM KNOB WOODWARD IMPRESA TM KNOB PREMIERE JULIENNE KNOB PREMIERE JULIENNE KNOB OVAL • 5-pin Cylinder • Solid Brass • 1” throw deadbolt with two hardened steel rollers prevents sawing • Weslock Keyway standard (Optional Schlage Keyway) • Removable knobs/levers prevents scratching during installation • Interconnect Option Available Entry Handle Specifications • Adjustable latches
PAGE 4
Elegance Collection Elegance Collection Push button locking in rosette. KNOBS & LEVERS ENTRY HANDLES & DEADBOLTS Grade II design for extra strength and security. Panic proof. One turn of the knob/lever unlocks and opens the door. Grade II cylindrical design for extra strength and security. Solid zinc die-cast material. 2008 Solid zinc die-cast rosettes. Removable faceplates allow for radius or square latches (drive-in latch available).
PAGE 5
Fold Traditionale Collection KNOBS & LEVERS 2008 Traditionale Collection ENTRY HANDLES & DEADBOLTS 2100 Series Entry Handle Features • 5-pin Cylinder • Solid Brass exterior • 1” throw deadbolt with two hardened steel rollers - prevents sawing • Weslock Keyway standard (Optional Schlage and Kwikset Keyway) BALL SAVANNAH TM BORDEÁU TM Knob & Lever Features • Cylindrical Door Locks • Meets ANSI A 156.
PAGE 6
Traditionale Collection Traditionale Collection ENTRY HANDLES & DEADBOLTS KNOBS & LEVERS Push button locking in rosette. Panic proof. One turn of the knob/lever unlocks and opens the door. ADA recommended extra large interior thumbturn. Grade II cylindrical design for extra strength and security. Grade II cylindrical design for extra strength and security. Concealed mounting screws are hidden behind the brass rosette. Rotating collar helps ensure security.
PAGE 7
Essentials Collection ENTRY HANDLES & DEADBOLTS Essentials Collection KNOBS & LEVERS Push button locking in rosette. Panic proof. One turn of the knob/lever unlocks and opens the door. ADA recommended extra large thumb turn. Grade II cylindrical design for extra strength and security. Concealed mounting screws are hidden behind the brass rosette. 2008 Removable faceplates allow for radius or square latches (drive-in latch available).
PAGE 8
Fold Essentials Collection KNOBS & LEVERS 2008 Essentials Collection ENTRY HANDLES & DEADBOLTS Entry Handle Features • 5-pin Cylinder • Zinc diecasted • 1” throw deadbolt with two hardened steel rollers prevents sawing BARRINGTON TM SONIC TM Entry Handle Specifications • Adjusts to door thickness from 1-3/4” to 2” • Optional door thickness 2” to 2-1/4” • Adjustable latches 2-3/8” or 2-3/4” with removable faceplates • Fits doors prepared with 2-1/8” Top and 2-1/8” Bottom cross holes and 1” edge hole •
PAGE 9
Reliant Collection TUBULAR LOCKSETS 2008 TULIP Collection Features • Tubular design meeting Grade 3 lock standards • Weslock® keyway (optional Schlage and Kwikset keyways) • 5-pin cylinder with special keying capabilities • Turn button locking in knob/lever • Non-concealed installation screws SALEM HUDSON NEWPORT BRISTOL CENTURY SOMERSET Collection Specifications • Adjustable backset (2-3/8” to 2-3/4”) with ﬁxed radius or square faceplate • Adjusts to door thickness from 1-3/8” to 2” • Entry Hand
PAGE 10
Reliant Collection TUBULAR LOCKSETS 2008 Non-concealed installation screws. Turn button locking in knob/lever. Tubular Grade III lock design. Fixed faceplate, radius or square latches (drive-in available). Brass knobs and solid zinc die-cast levers. Deadlatch on all keyed entry products increases security. Zinc die-cast cylinder with 5-pin tumbler security. Adjustable latch. Fits doors prepared with either 2-3/8” or 2-3/4” backset.
PAGE 11
Interconnected LOCKSETS 2008 (Exterior) (Interior) UNIGARD TM (1500 SERIES) LEXINGTON TM (1400 SERIES) COLONIAL TM (1400 SERIES) 1400 Series Entry Handle Features • 5-pin Cylinder • 1” throw deadbolt with two hardened steel rollers - prevents sawing • Available with any interior Traditionale Collection knob or lever style • Solid Brass • Smooth interior Nolin plate • Weslock keyway standard (optional Schlage Keyway) • Meets 2-point locking code 1400 Series Entry Handle Specifications • Non-adjus
PAGE 12
Interconnected LOCKSETS Grade II design for extra strength and security. 2008 Removable faceplates allow for radius or square latches (drive-in latch available). Zinc die-cast cylinder with 5-pin tumbler security. Concealed screws. Mounting screws are hidden behind the brass rosette. Panic proof. One turn of the knob/lever unlocks and opens the door. Removable levers and knobs prevents scratching during installation. Brass knobs and solid zinc die-cast levers. Non-adjustable latches.
PAGE 13
Fold U.L. Rated Collection 2008 LOCKSETS U.L. Rated Collection ENTRY HANDLES & DEADBOLTS UnigardTM and 1844 Features HUDSON SALEM TULIP CENTURY NEWPORT SOMERSET BRISTOL Knob & Lever Features • PVD ﬁnish Available (Optional – List plus 5.00 adder) • Meets Grade 3 lock standards and U.L.
PAGE 14
U.L.ENTRY Rated Collection HANDLES & DEADBOLTS ADA recomended extra large interior thumbturn. U.L. LOCKSETS Rated Collection Non-concealed instalation screws. Turn button locking in knob/lever. Fire proof metal cup (not shown). Fire proof metal cup. Grade II cylindrical design for extra strength and security. 2008 Tubular Grade III lock design. Rotating collar helps ensure security. Solid brass fixed faceplate, radius or square latches. Solid brass fixed faceplate, radius or square latches.