Installation Sheet

18” or 24” Towel Bar
Instrucons:
Installation Instructions
Bath Hardware
c
2011
Tulsa. Oklahoma
1 Idenfy and mark center to center measurement for mounng
plates and posts. Install both mounng plates and posts to wall
with two wall anchors and screws.
2 Slide decorave plates over mounng posts.
3 Slide one decorave post over mounng post.
4 Secure decorave post by ghtening with Allen wrench.
5 Place plasc insert into decorave post
6 Slide towel bar into installed decorave post.
7 Place plasc insert into decorave post,
8 Slide uninstalled decorave post onto other end of towel bar.
9 Slide uninstalled decorave post over mounng post.
Secure decorave post by ghtening with Allen wrench.
Center to center
17 9/16” or 23 5/8”
5
6
8
7
9
10
10