Installation Sheet

Instrucons:
Installation Instructions
Bath Hardware
c
2011
Tulsa. Oklahoma
1 Idenfy and mark center to center measurement for mounng plates
and posts. Install both mounng plates and posts to wall with two wall
anchors and screws.
2 Slide decorave plates over mounng posts.
3 Slide decorave post with fixed end onto mounng post.
4 Secure decorave post by ghtening with Allen wrench.
5 Slide decorave post with pivong end onto mounng post.
6 Secure decorave post by ghtening with Allen wrench. However,
ensure the ssue holder pivots in the upward direcon, so toilet
paper roll slides down when installed.
Center to center
BATH HARDWARE
Standard Tissue Holder
center to center
6-5/8" minimum