Use and Care Manual

English - 5
HELPFUL HINTS
Always use fresh popcorn. Dried out, stale, or old popcorn pops poorly as it has
lost its moisture content and may scorch.
Store popcorn in airtight containers made of glass or plastic to avoid moisture loss
in the kernels. Be sure that the container is stored in a cool place, do not store in
the refrigerator. Most refrigerators contain little moisture and can dry out kernels,
resulting in poor popping.
This popcorn popper can accommodate both regular and premium popcorns.
Premium and gourmet popcorns may not yield results as good as regular popcorn.
If premium or gourmet popcorn is used, you may notice an increase in the number
of unpopped kernels.
If popcorn does not pop, it is usually the result of environmental factors such as
the freshness and moisture content of the popcorn, or variances by popcorn type.
Unpopped kernels do not necessarily indicate a defect in the appliance.
Instead of popping with vegetable oil, try one of these healthy choices, extra virgin olive
oil, canola oil, coconut oil, corn oil, peanut oil, or sunflower oil. Specialty oils may also
be used, but some experimentation may be necessary to find the best popping results
and flavor you prefer. Do not use more than 3 tablespoons of any oil.
Add flavor to your oil while popping - add a garlic clove or minced garlic, onion
slices, or jalapeño peppers.
When done popping, start layering flavors. We find a light misting of olive oil,
(many great infused olive oils are also available) lemon or lime juice, balsamic
vinegar, or even water will help any additional seasonings adhere to the corn.
CLEANING YOUR STIR CRAZY
®
CORN POPPER
Clean Popper After Every Use - Your corn popper should be cleaned after each
use. Always allow popper to cool completely before cleaning.
Cleaning Cover - Wash cover and butter lid in warm, soapy water with a dishcloth or
sponge. Rinse thoroughly and dry. Do not use scouring pad or abrasive cleaners on
cover as these could cause scratching. The cover and butter lid may be washed in
an automatic dishwasher, top rack only.
Cleaning Stir Rod - Remove stir rod from base by unscrewing securing knob. Wash
rod and securing knob with warm, soapy water using a dishcloth or sponge. Rinse
thoroughly and dry. Replace stir rod after cleaning base, making sure it fits into
notched area around screw. Secure with securing knob.
Cleaning Popper Base - Clean non-stick surface of base with a damp, soapy dishcloth,
sponge or nylon-scouring pad. Wipe surface with a damp cloth and dry. Do not use
abrasive scouring pads or powders on non-stick finish as scratching may occur. After
consistent use, the non-stick finish may discolor. To remove discoloration, use a soft cloth
saturated with lemon juice or vinegar and rub over finish. Then wipe the finish with a
damp cloth and dry. To use the cord wrap, wind the cord around the post at the bottom of
the appliance for easy, tangle-free storage. Store the popper base inside the cover.
DO NOT PLACE POPPING BASE IN AN AUTOMATIC DISHWASHER OR
IMMERSE IN WATER OR ANY OTHER LIQUID.
This appliance has no user serviceable parts.