Impor tant Safety Instruction CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Impor tant Safety Instruction NOTES 1) Read these instructions 2) Keep these instructions 3) Heed all warnings 4) Follow all instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USE-SERVICEABLE PARTS INSIDE.
Impor tant Safety Instruction Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may effect safety or timing while driving. Use the unit only as a navigational aid.
Chapter Ⅰ CONTENTS Chapter I Preparation for use 1.1 Introductions to appearance and buttons 1.2 Charge 1.3 ON/OFF 1.4 Use of touch pen Chapter I Preparing the P3 for Use This chapter guides you to get the P3 started, and also describes the basic operations of the navigation device． 1.1 Introduction to appearance and buttons 1.1.1 Front appearance and buttons： 1.5 Communication with computer Chapter II Introduction to use 2.1 Introduction for main interface and main functions 2.
Chapter Ⅰ Chapter Ⅰ Chapter 1.1.3 Left-side appearance and buttons 【Description】 Power Socket: DC port is connected with the charge power supply; used when charging the navigation device ON／OFF button 【 Note】 The device has a built-in, irreplaceable lithium battery. To avoid the risk of fire or burning, please do not open, perforate, hit the battery or discard it in fire or water. The battery will burst, blast or release dangerous chemicals.
Chapter Ⅰ Chapter Ⅰ programs and switches into the computer communication interface; 4. After communication is completed, remove the MINI USB cable. The GPS navigation device continues to run the suspended programs. 【 Note】 Data Security: Please backup system data into external storage devices before upgrading system data. Our company shall not be held responsible for system data damage or loss. 1.4 Using the touch pen The touch pen (stylus) is your tool to communicate with P3. 1.
Chapter Ⅱ Basic Operations Chapter Ⅱ Basic Operations Chapter II Basic Operations This chapter provides a brief introduction to the main interface of the device and also issues basic guidelines to maintain and preserve the device. 2.1 Main interface and its functions 2.1.1 Main interface of system: 【 Note】 Accidental damage is excluded from the scope of the maintenance contract.
Chapter Ⅲ Using the Audio Player This chapter explains how to play your favorite music using P3 audio player, Chapter Ⅲ Using the Audio Player The table below explains the functions of each icon in the above screen. and transform it into your portable MP3. 3.1 Functions and features PL AY Indicates that the song has been suspended/stopped .Click to continue playing.
Chapter Ⅳ Setting Chapter Ⅲ Using the Audio Player 3.2.2 Interface of audio folder: The screen below shows the Audio folder interface This chapter explains the steps to be carried out to setup the device for operation. Click the “Settings” icon to enter the “Settings” menu and set up the system.
Chapter Ⅳ Setting Chapter Ⅳ Setting 4.1 Volume setup Tap Volume 4.3 Backlight setup in the setting menu to enter Volume settings menu for volume adjusting, as shown below. Tap Brightness in the setting menu to enter Brightness for backlight adjusting, as shown below. Tap to adjust the backlight level. After setting up, tap v to confirm or tap × to cancel. Tap or tap buttons to adjust the volume. Then tap v to confirm × to cancel. 4.2 Power setup 4.
Chapter Ⅳ Setting 4.5 Chapter Ⅴ Language selection languages Tap in the setting menu to enter languages setting menu for language selecting, as below shown Use of Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories to mount the unit in the vehicle. ENGLISH to select the languages.Then tap v to confirm or Tap tap × to cancel 4.6 Tap Calibrate calibrate in the settings menu to calibrate, the screen will display.
Chapter Ⅵ Chapter Ⅵ Specification TFT Screen size 3．5 inches Frequency Response 20Hz～20KHz Audio Signal－to－noise Rate ≥80db Audio distoution or noise = -20db（1KHz） Channel Separation ≥70db（1KHz） Dynamic Range ≥85db（1KHz） Power AC 100～240V，50／60Hz；DC5V Power Consumption ＜8W Dimensions 110mm×85mm×25mm（L＊W＊D） Weight About 0．2kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
