Mixer User Manual

3
SPECIAL NOTE: When first using your mixer, you may note an off odor from the motor. This is
normal and will dissipate as the motor is broken in.
• Clean Before Using
Before using your mixer the first time, wash the bowls, beaters and the dough hooks in hot soapy
water with a dishcloth, rinse and dry. These parts may also be washed in an automatic dishwasher.
Wipe mixer head, stand and turntable with a damp cloth and dry.
CAUTION: To prevent personal injury or electric shock, do not immerse mixer, its cord or plug in
water or other liquid.
Your mixer is now ready to use.
• To Assemble Mixer - Your mixer requires some assembly before using. Do not plug into
electrical outlet until after mixer is assembled.
1. o attach mixer to stand, press and hold down
mixer release lever at top of stand. Then position
mixer head on stand so metal pin on underside
of mixer fits into groove below release lever.
When engaged, release the lever. Make sure
mixer is securely attached to stand before using.
MIXER SHOULD NOT BE USED AS A HAND
MIXER. IT MUST ALWAYS BE USED ON THE
STAND.
2. Place turntable onto platform of stand, aligning
extension on underside into correct opening for size
bowl being used, Small or Large. Lip on underside
of bowl will fit into groove on turntable
3. To insert beaters, lift mixer head up until it stops. The round
shaped beater with the Hexagon collar fits into the left socket
of mixer. The square shaped beater, with round 

 collar, fits into
the right socket. See symbols on underside of mixer to match
beaters. Insert beaters by pushing shaft into socket, turning
slightly if needed until they lock in place. Beaters must be
inserted into correct socket as they are not interchangeable
.
4. To insert dough hooks, lift mixer head up until it stops. The
dough hook with the Hexagon collar fits into the left socket and
the dough hook with the round 

 collar fits into the right socket.
See symbols on underside of mixer to match hooks. Turn hooks
slightly if needed until they lock in place. Dough hooks must be
inserted into correct socket as they are not interchangeable
.
• To Use Mixer
1. Make sure speed control dial is set at OFF position and mixer is
securely attached to the stand before using. MIXER SHOULD
NOT BE USED AS A HAND MIXER. USE ONLY ON STAND.
DO NOT USE MIXER UNATTENDED.
2. Position turntable according to size bowl being used. Position bowl onto turntable.
3. Insert beaters or dough hooks into correct sockets.