Owner's Manual

ASSEMBLING YOUR SMOOTHIE SIGNATURE

™

Before assembling your Smoothie Signature

™

wash all parts, except for the motor

base in warm, soapy water, rinse thoroughly and dry. Unscrew and disassemble the

valve for cleaning (see Cleaning Your Smoothie Signature

™

section). To prolong the

life of your smoothie maker, do not wash parts in the dishwasher.

1. Position the rubber gasket down onto the circular flat surface in the blade base.

2. Screw the blade base onto the bottom of the blending jar by twisting the blade

base counter-clockwise until tightened. Make sure that the blade base is tightly

fastened to the blending jar and that the rubber gasket is properly compressed

between the blending jar and the blade base.

3. Press the lid onto the top of the blending jar. Press the clear lid cap in the

center of the lid or place the stir stick through the center of the lid if blending

liquids or frozen drinks.

4. Place the blending jar onto the motor base so that the bottom of the blade base

is sitting flat on the motor base.

5. Plug in the cord. Your smoothie maker is now ready to use.

Stir Stick

Lid Cap

Lid

Blending Jar

Dispensing Valve

Blender Cap

Rubber Gasket

Blade Base

Motor Base