SINGLE SERVE COFFEEMAKER INSTRUCTION MANUAL

• A small amount of smoke and/or odor may occur upon heating due to the

release of manufacturing oils – this is normal.

• Some minor expansion/contraction sounds may occur during heating and

cooling – this is normal.

POD COFFEE BREWING – Any standard single serve Pod will work.

Using the Pod/Filter Holder, Place one or two pods (to taste) into the Pod/Filter

Holder. Pack the Pod(s) tight to the bottom of the holder. Using the desired cup size

as your measure (maximum 12 oz.), add cold water to the Server reservoir. Set your

cup in place on Server and press the Start button. Brewing will complete in

approximately 2-3 minutes.

GROUND COFFEE BREWING - Use standard drip grind coffee.

Place the Permanent Filter into the Pod/Filter Holder and position into the Server.

Using the coffee measure, add a heaping measure of grounds into the filter. Using

the desired cup size as your measure (maximum 12 oz.), add cold water to the

Server reservoir. Set your cup in place on Server and press the Start button.

Brewing will complete in approximately 2-3 minutes. Note: Adjust the amount of

grounds to taste.

TEA BREWING – BAGS

Place one tea bag into your cup and set in place on Server. Add ¾-cup (6 oz.) of

cold water to Server. Press the Start button. When brewing is complete

(approximately 2 minutes), allow to steep for three minutes or to taste. Note: Adjust

the amount of water to taste.

TEA BREWING – LOOSE

Place the Permanent Filter into the Pod/Filter Holder and position into the Server.

Using the coffee measure, add a heaping measure of loose tea into the filter. Using

the desired cup size as your measure (maximum 12 oz.), add cold water to the

Server reservoir. Set your cup in place on Server and press the Start button.

Brewing will complete in approximately 2-3 minutes. Note: Adjust the amount of

loose tea to taste.

OATMEAL

Place contents of one single serve instant oatmeal package (approximately 1½ oz.

or 43g), into 12 oz. cup and set in place on Server. Add ½-cup (4 oz.) of cold water

to Server reservoir. Press the Start button. When brewing is complete

(approximately 2 minutes), stir contents to desired consistency and allow to steep for

an additional 1 or 2 minutes. Add sugar and/or milk if desired. Note: If using bulk

packaged instant oatmeal, use ½ cups of oats and 1-cup (8 oz.) of water. Adjust the

amount of water to taste and desired consistency.