Instruction Manual

III-17 Inputs
III-17.1 AINP1 ( analog input 1 (No. 08))
For direct connection of temperature sensors, for potentiometric transducers and standard signals
General
Function ‘AINP1’ is used for configuration and parameter setting of analog input INP1. It is firmly allocated to block
number 61 and is calculated firmly in each time slot. The function provides a corrected measurement value and a mea -
surement value status signal at its outputs.
Inputs/outputs
Digital inputs:
lock
Calibration locked (with lock = 1 calibration is locked)
hide
Display suppression (with hide = 1 the calibration page is not displayed)
Digital outputs:
fail
Signals an input error (short-circuit, polarity error, ..)
a/m
Manual signal
inc
Increment signal
dec
Decrement signal
Analog inputs:
Y
Output variable
Analog outputs:
Inp1
Signal input
9499-040-82711 Inputs
AINP1 ( analog input 1 (No. 08)) III-274
INP1
CONTR
CONTR+
x
y
Processvalue
corr. Variable
corr. Variable
CONTR
CONTR+
a/nt