Assembly Instruction

ManualsBrandsWest Elm ManualsStorage FurnitureWest Elm Angled-Leg Sideboard

angled leg sideboard

assembly instructions

Page 1 of 8 5767215 - 2.29.08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Proper assembly of this item requires 2 people.

A B

C D

cam bolt: M6 * 51mm 15x

E F

G H

cam lock: M15 * 14mm 15x

short screw: dia 3 * 19mm 32x

19mm 6x

lock washer: 8mm 6x

allen key 8mm

shelf support 16x

large bolt: 8mm dia by 38mm 6x

Summary of content (8 pages)

PAGE 1
angled leg sideboard assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Proper assembly of this item requires 2 people. A B cam bolt: M6 * 51mm 15x C cam lock: M15 * 14mm 15x D short screw: dia 3 * 19mm 32x E large bolt: 8mm dia by 38mm 6x F 19mm 6x G H allen key 8mm 5767215 - 2.29.
PAGE 2
angled leg sideboard assembly instructions 1. Insert cam bolts (A) into left end panel (1) and partition (2) as shown and tighten with a phillips screwdriver. 2. Set cam locks (B) into cross brace (be sure holes in cam locks always face toward the outside edge of panel to fit into cam bolt). Fit side panels into cross brace and tighten cam locks with a phillips screwdriver. 3. Insert cam bolts (A) into bottom panel (5) as shown and tighten with a phillips screwdriver. 4.
PAGE 3
angled leg sideboard assembly instructions 5. Insert cam bolts (A) into top panel (6) as shown and tighten with a phillips screwdriver. 6. Set cam locks (B) into end and partition. Fit end panels and partition into top panel and tighten cam locks with a phillips screwdriver. 7. Move to back side of case. Fasten back panels (7) & (8) in place as shown using short screws (C) as shown. Tighten screws with a phillips screwdriver. 8.
PAGE 4
angled leg sideboard assembly instructions allen key (G). G D F E 10. Insert shelf supports (H) at desired locations and set in shelves. H 5767215 - 2.29.
PAGE 5
angled leg sideboard assembly instructions 11. Connect doors (11) (12) & (13) to cabinet panels by snapping hinges together as shown. 11 13 12 . Fit together angled shelf panels as shown if desired for use. 5767215 - 2.29.
PAGE 6
angled leg sideboard assembly instructions 13 H 5767215 - 2.29.
PAGE 7
angled leg sideboard assembly instructions 14. In order for proper fitting of doors, case must be level. Adjust levelers in feet as needed by turning counterclockwise to lower and clockwise to raise. clockwise counter clockwise **case MUST be level** 5767215 - 2.29.
PAGE 8
angled leg sideboard assembly instructions 15. Hinges are adjustable. A combination of these adjustments may be necessary to level doors. FOR SIDE adjustment (adjusting the gap between doors and leveling doors) c 1. Adjust gap by turning screw B A FOR DEPTH adjustment (adjusting how close the doors rest against the cabinet): B 1. Loosen screw A . 2. Adjust depth. 3. Re-tighten screw A . FOR HEIGHT adjustment c 1. Loosen screw C (both screws) 2. Adjust height. 3. Re-tighten screws.