Assembly Instruction

5. Unscrew ring from socket, place shade over socket, fasten ring back over socket to secure shade.
6. Insert lightbulb as shown.
7. Place shade cover over shade and screw on finial (D) to secure cover.
B
A
D
bamboo flush mount
9780891- 06/07
assembly instructions
2 of 2
3. Attach house wire to lamp wires as shown. Fasten the pairs together with a wire caps (A). DO NOT REVERSE THE HOT AND
NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
4. Attach front face of light to back plate by inserting canopy screws (B) through predrilled holes in front
face and into back plate as shown. Tighten using screwdriver.