Assembly Instruction

bamboo triple sconce
9762592- 06/07
assembly instructions
1 of 2
wire cap 3x
mounting screw 2x
A
canopy screw 2x
B
C
40-watt TYPE B standard bulbs (not included). To avoid the risk of
Important Safety Instructions:
• These instructions are provided for your safety. It is important that they are read carefully and completely before
installing the sconce.
• We strongly recommend that a professional electrician install all direct wire fixtures.
• This fixture has been rated for up to (1)
• For your safety, use only shades with an open top with a measurement of at least 4” in diameter.
fire, do not exceed the recommended wattage.
Warning:
•
Pre-assembly:
• Remove all parts and hardware from box along with any plastic packaging. Do not discard any
contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug lamp, and allow it
to cool prior to replacing light bulb.
•
Do not touch bulb when fixture is turned on.
•
Keep flammable materials away from lit bulb.
1. Attach back plate to wall or junction box using mounting screws (C).
2. Connect ground wire from wall to ground wire from lamp using wire caps (A).
C
ground wire
A