bond lateral file cabinet assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
bond lateral file cabinet assembly instructions Hardware A B cam bolt 12x cam lock 12x D C bolt 8x wood dowel 14x E F spring washer 8x flat washer 8x H G metal file bar 8x long wood screw 22x Anti tip kit Mounting Plate 4x 7087851 - 09-29-08 Large Screw 2x Small Screw 2x Nylon Strap 2x wall anchor 2x Page 2 of 10
bond lateral file cabinet assembly instructions 1 2 frame 1x upper rail 1x 4 3 back rail 1x front rail 1x 5 6 leg frame 2x rail 2x 8 7 upper drawer frame 1x top panel 1x 9 10 lower drawer frame 1x 12 11 drawer front panel 2x 7087851 - 09-29-08 drawer bottom panel 2x drawer bottom rail 2x Page 3 of 10
bond lateral file cabinet assembly instructions 1. Locate the 1 upper rail (2) and 1 front rail (3) and insert cam locks (B) into the holes as shown. Note: the front rail (3) has 3 more bolt holes in it. 2. Lay the frame (1) on a clean smooth surface and open the hinged sides outward to 90 degrees. 3. Insert wooden dowels (C) into holes as shown. Screw cam bolts (A) into holes as shown.
bond lateral file cabinet assembly instructions 4. Insert wooden dowels (C) into bottom of frame. Align back rail with theses dowels and attach using bolt (D), spring washer (E), and flat washer (F). Tighten with allen key.
bond lateral file cabinet assembly instructions 5. Locate the rails (6). Insert cam locks (B) into each end like the drawing shows. 6. Screw in cam bolts (A) into each leg frame (5) as shown. 7. Assemble bottom frame by attaching the 2 rails (6) to the 2 leg frames (5) and tighten cam locks (B) with supplied allen key.
bond lateral file cabinet assembly instructions 8. Align assembled base frame with the holes in the bottom of the cabinet and attach using bolt (D), spring washer (E), and flat washer (F). F E D 9. Screw cam bolt (A) into bottom of top panel (7). Insert wooden dowels (C) into top of cabinet frame. Insert cam locks (B) into holes in top of cabinet sides. Align holes and place top panel down onto cabinet. Tighten Cam locks (B) with phillips head screwdriver 1/2 turn.
bond lateral file cabinet assembly instructions 10. Unfold upper drawer frame (8) and lower drawer frame (9). Slide drawer bottom panel (10) into slots on sides of 11. Align drawer front panels (11) to drawer frames (8 & 9). Attach using long screws (G), tighten with phillips head screwdriver. DO NOT OVERTIGHTEN. 12. Attach drawer bottom rail (12) to the bottom of each drawer using long screws(G). Tighten with phillips head screwdriver. DO NOT OVERTIGHTEN.
bond lateral file cabinet assembly instructions 13. After drawers are assembled insert metal file bars (H) where you would like them. They will work for letter or legal files. 14. Insert drawers into cabinet. Align drawer guides and push drawer firmly into case until it closes all the way into the case. Make sure that you install the top drawer into the top slot and the bottom drawer into the bottom slot. Note the location of the bracket on the side of the drawers.
bond lateral file cabinet assembly instructions OVER BALANCE. To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the two (2) sets of overbalance protection hardware included with this product . 1. Attach the two mounting brackets securely to the back edge of the furniture. Place one on each of the side panels. 2. Determine where the furniture is to be placed and mark location on the wall for the other tw o mounting bracket screw holes.
