Assembly Instruction

ManualsBrandsWest Elm ManualsTablesWest Elm Corner Leg Coffee Table

corner leg coffee table

assembly instructions

Page 1 of 69356007 - 01.06.09

! Tools supplied:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

! Proper assembly of this item requires 2 people.

bolts 6mm x 30mm 64x

Hardware

bolt 6mm x 40mm 8x

angle bracket 8x

corner bracket 8x

Summary of content (6 pages)

PAGE 1
corner leg coffee table assembly instructions ! Tools supplied: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people. Hardware B A bolt 6mm x 40mm 8x bolts 6mm x 30mm 64x C D angle bracket 8x 9356007 - 01.06.
PAGE 2
corner leg coffee table assembly instructions 1. Align the left and right legs so that the mitered sides touch like the drawing shows. Insert corner bracket (D) into the slots on both ends. Insert bolt (A) through the corner bracket (D). Tighten with supplied hex key. DO NOT OVERTIGHTEN! A D Left and right legs 9356007 - 01.06.
PAGE 3
corner leg coffee table assembly instructions 2. Attach angle brackets (C) onto the sides of the assembled legs. Insert bolt (A) throught the bracket into the legs. Tighten with supplied hex key. DO NOT OVERTIGHTEN. C A 9356007 - 01.06.
PAGE 4
corner leg coffee table assembly instructions 3. lay the top panel face down on a clean smooth surface such as carpet or cardboard. Align 2 leg assemblies at opposite corners like the drawing shows. Insert bolt (A). Tighten with supplied hex key. A 9356007 - 01.06.
PAGE 5
corner leg coffee table assembly instructions 4. Align shelf with holes on leg assemblies. Insert bolt (B). Tighten with supplied hex key. B 9356007 - 01.06.
PAGE 6
corner leg coffee table assembly instructions 5. Attach the other 2 leg assemblies wth bolt (A). Tighten with supplied hex key. Insert bolt (B) through cleats on shelf and into legs. Tighten with supplied hex key. DO NOT OVERTIGHTEN! B A CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners. 9356007 - 01.06.