Assembly Instruction

ManualsBrandsWest Elm ManualsAccessoriesWest Elm Corner Media Unit

corner media unit

assembly instructions

Page 1 of 42040418/2040426- 03.02.10

x18

Parts

x12

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.

! Proper assembly of this item requires 2 people.

Mounting Plate 4x

Nylon Strap 2x

Small Screw 4x Large Screw 4x

Anti tip kit 2x

CAUTION:

The top shelf of this stand is intended for use with:

Plasma/LCD televisions having a maximum screen size of 40” and a weight of 80lbs.

Tube televisions having a maximum screen size of 16” and a weight of 35lbs.

Summary of content (4 pages)

PAGE 1
corner media unit assembly instructions CAUTION: The top shelf of this stand is intended for use with: Plasma/LCD televisions having a maximum screen size of 40” and a weight of 80lbs. Tube televisions having a maximum screen size of 16” and a weight of 35lbs. ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
corner media unit assembly instructions 1 2 x1 x1 3 R 4 x1 L x1 5 x1 1. Lay part #2 on a clean flat surface. Insert dowels (C), and cam bolts (B) like the drawing shows. Insert cam locks (A) into shelf #4 and #5. Align shelf with part #2 and press together. Turn cam locks 1/2 turn with a phillipshead screwdriver. This will lock them together. Repeat this step for the bottom shelf. 2040418/2040426- 03.02.
PAGE 3
corner media unit assembly instructions 2. Align part #3. Insert dowels (C), and cam bolts (B) like the drawing shows. Insert cam locks (A) into shelf #4 & #5. Align shelf with part #3 and press together. Turn cam locks 1/2 turn with a phillipshead screwdriver. This will lock them together. 3. Flip assembled base upright. Insert cam bolt (B) and dowel (C) into top panel #1. Align top panel #1 over assembled base. Insert cam lock (A) into side panels #2 and #3. Press top panel down onto sides.
PAGE 4
corner media unit assembly instructions NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this product. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximately 1” below the top on the back of the piece of furniture. 2.