Assembly Instruction

cubic bath triple base

assembly instructions

Page  of 3787999—03/06

bolt: /4” dia by  /4” 2x

lock washer 2x

allen key x

metal washer 2x

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

PAGE 1
cubic bath triple base assembly instructions ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
cubic bath triple base assembly instructions 1. Insert bolt (B) with lock washer (C) and metal washer (D) through predrilled hole in bottom corner of base and into cubic bath cabinet, as shown. Tighten using allen key (A). D C B A CARE INSTRUCTION Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.
PAGE 3
cubic bath triple base assembly instructions OVERBALANCE To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the two (2) sets of overbalance protection hardware included with this product. 1. Attach the two mounting brackets (I) horizontally to the top back edge of the furniture. Insert the short screws (III) through the holes in the bracket (I) and tighten securely using screwdriver. 2.