" , $ " 6 0 7 $ $ $ ) + ) ( # ) ( # $ $ # $ 3 # # $ ) $ % / $ $ * $ ) - # ) $ % ( ) ( + + '
1. Align shelves and end assemblies as shown. Insert dowels (F). Insert bolts (B), lock washer (D), and flat washer (E). Tighten with supplied hex key (I). 1. Aligner les étagères et des ensembles d’extrémité comme indiqué. Insérez les goujons (F). Insérez les bou lons (B), la rondelle (D), et la rondelle plate (E). Serrez avec la clé hexagonale fournie (I). 1. Alinear los estantes y montajes finales han demostrado. Inserte las espigas (F).
. Align clips (G) with the back panel and the ends. Insert bolts (C), lock washer (D), and flat washer (E). Tighten with the supplied hex key (I). 3. Aligner les clips (G) avec le panneau arrière et les extrémités. Insérez les boulons (C), la rondelle (D), et la rondelle plate (E). Serrer Fourni avec la clé hexagonale (I). 3. Alinear los clips (G) con el panel trasero y los fines de semana. Inserte los pernos (C), la arandela de seguri dad (D), y la arandela plana (E).
5. Insert shelf pins (H). Align shelf with pins. Press adhesive pads (J) on to front bottom edge as shown. Align door hinges with hinge plates on cabinet. 5. Épingles insérer la tablette (H). Aligner plateau avec des épingles. Pastilles adhésives de presse (J) sur le bord inférieur avant comme indiqué. Alignez les charnières de porte avec plaques de charnière sur le meuble. 5. Inserte los pernos de estante (H). Alinear con estanterías de pino.
Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit and mending plates included with this product. Mending plates must be used to attach armoie to base cabinet. 1. Align mending plates (E) over the top nack edge of the base cabinet and the bottom back edge of the armoire about 2 inches in from the sides. Insert screws (D).
Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x NAVIS: Pour éviter les dommages corporels et matériels de basculement imprévu des meubles, nous recommandons fortement l’installation du kit anti-basculement et les travaux de réparation des plaques inclus avec ce produit. Plaques guérison doit être utilisé pour attacher armoie au Cabinet de base. 1.
Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x AVISO: Para evitar lesiones y daños a la propiedad de inflexión inesperada de muebles, le recomendamos la instalación del kit anti-vuelco y las placas de reparación incluye con este producto. Placas de alivio debe ser utilizado para fijar armoie de gabinete de la base. 1. Alinear placas de unión (E) sobre el borde nack parte superior del gabinete de base y el borde inferior posterior del armario de 2 pulgadas de de los lados.