Assembly Instruction

Page  of 

mounting instructions

! For drywall mounting, use anchors with screws.

! For stud mounting, use screws only.

deep framed wall mirror

NOTE

• Stud mounting is recommended. When in doubt, consult

your local hardware store. For your safety, installation by two

people is strongly recommended.

• Wipe frame with a soft, dry cloth. To protect the nish, avoid

the use of all chemicals and household cleaners.

. Place the template at the desired location on wall and

ensure that the template is level. Using a pencil, mark the

locations on the wall as shown. This is where the hardware

will be inserted.

2. For stud mounting: skip to step 3. For drywall mounting:

using a Philip’s head screwdriver, insert the drywall anchors

(A) into the wall at the insertion points. Press and turn clock-

wise until anchors are ush with the wall.

3. Insert screws (B) into the anchors or at the insertion

points, leaving approximately /2” between the back of the

screw head and the wall.

4. Align keyhole notches over the screw heads.

5. Slide the mirror down until it rests on the screws. Tighten

or loosen screws as needed to t the shelf snugly against the

wall.

drywall anchor 2x

screw 2x

7806888/7806862/7806870—03/06