! " " # $ $ % & ' ( ! " ! " * & " # " - .
1. With help lay the buffet on its back on a clean smooth surface such as carpet or cardboard. Align legs as shown. Insert bolts (A), lock washer (B), and flat washers (C). Tighten with supplied hex keyh (D). 1. Avec l’aide de laïcs au buffet sur le dos sur une surface propre et lisse comme la moquette ou du carton. Aligner les jambes comme indiqué. Insérez les boulons (A), la rondelle (B), et des rondelles plates (C). Serrer avec Keyh hexagonale fournie (D). 1.
2. Stand buffet upright. Open doors and drawers. Insert bolt (F) and align pull (E). Tigthen with screwdriver. 2. Stand buffet debout. Ouvrez les portes et tiroirs. Insérez le boulon (F) et d’aligner de traction (E). Bien fixer avec un tournevis. 2. Stand buffet en posición vertical. Abra puertas y cajones. Inserte el perno (F) y alinee tire (E). Tigthen con un destornillador.
3. Insert shelf pins into side panels as shown. Lay shelf onto pins. 3. Épingles insérer la tablette en panneaux latéraux, tel qu’illustré. Lay étagères sur les goupilles. 3. Inserte las clavijas del estante en los paneles laterales como se muestra. Coloque la repisa sobre los pasa dores. 8x CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.
back side wall NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installa tion of the anti-tip kit included with this product. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximately 1” below the top on the back of the piece of furniture. 2.