Assembly Instruction

ManualsBrandsWest Elm ManualsAccessoriesWest Elm Glass Jar Pendant Short

Important Safety Instructions:

•These instructions are provided for your safety. It is very important that they are read carefully and com

pletely before beginning the installation of this lighting  xture.

•THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A

PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS IN

VOLVED.

•We strongly recommend that a professional electrician install all direct wire  xtures.

•This  xture has been rated for up to (1) 60-Watt maximum Type A standard incandescent light bulbs (not

included) or 13-watt compact  uorescent bulb (included). To avoid the risk of  re, do not exceed the rec

ommended lamp wattage.

•The lighting  xture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical sup

ply systems (provided with Ground wire or equivalent protection system).

• Save this instruction.

WARNING:

• To reduce the risk of  re, electrical shock or personal injury,

always turn o light  xture and unplug, allowing it to cool

prior to replacing light bulb.

• Do not touch bulb when  xture is turned on.

• Do not look directly at lit bulb. Keep  ammable materials

away from lit bulb.

SHUT OFF ALL THE MAIN ECLECTRICAL SUPPLY FROM THE

FUSE BOX / CIRCUIT BREAKER

Pre-assembly:

•Remove all parts and hardware from box along with any

plastic protective packaging. Do not discard any contents until

after assembly is complete to avoid acciden

tally discarding small parts or hardware.

•For your safety and convenience, assembly by two people is recommended.

PARTS INCLUDED: HARDWARE ENCLOSED: TOOLS REQUIRED (not included)

(1)Glass bottle (A) (1) Green ground screw (a) 1.Electrical tape

(1)Socket (B) (2) Mounting screws (b) 2.Screwdriver

(1)Metal Assembly Part (C) (3) Plastic wire connectors (c) 3.Two peoples recommended

(2)Canopy (D) (2) Headless screws (d)

(1)Mounting Plate (E) (3) Worm screws (e)

Summary of content (6 pages)

PAGE 1
Important Safety Instructions: •These instructions are provided for your safety. It is very important that they are read carefully and com pletely before beginning the installation of this lighting fixture. •THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS IN VOLVED. •We strongly recommend that a professional electrician install all direct wire fixtures.
PAGE 2
To Assemble: 1.Carefully unpack all fixture parts and hardware and lay them on a clean workspace. 2.Gently pull wiring down from ceiling junction box and allow the lamp to hang. 3.Carefully inspect the pendant’s fixture wires. The NEUTRAL FIXTURE WIRE is white. The HOT FIXTURE WIRE is black. And the GROUND WIRE is green. 4.Attach the Ground Wire from the fixture to the Ground Junction Box Wire from the outlet (usually green or bare wire).
PAGE 3
Importantes Consignes de Sécurité: •Ces instructions sont fournies pour votre sécurité. Il est important que vous les lisiez en entier et en détails avant de commencer l’assemblage de ce luminaire. •CE PRODUIT DOIT ETRE INSTALLE SUIVANT LES CODES D’INSTALLATION APPLICABLES PAR UNE PERSONNE SPECIALISEE DANS LE DOMAINE DE LA CONSTRUCTION ET DE L’UTILISATION DE CE TYPE DE PRODUIT ET DES RISQUES ENCOURUS. •Nous recommandons vivement l’installation des câbles électriques par un électricien professionnel.
PAGE 4
Pour l’assemblage: 1.Sortez toutes les pièces et le matériel du carton d’emballage et étalez-les sur une surface de travail propre. 2.Tirez vers vous les câbles électriques situés dans la boîte d’alimentation du plafond afin de pendre le lumi naire. 3.Inspectez tous les câbles attachés au luminaire. LE FIL NEUTRE DU LUMINAIRE est blanc. Le FIL PHASE DU LUMINAIRE est noir et le FIL DE TERRE DU LUMINAIRE est vert. 4.
PAGE 5
Intstrucciones de Seguridad Importante: . Se proporcionan estas instrucciones para su seguridad. Es importante que las lea de manera detallada y completa antes de ensamblar la unidad de iluminación. . ESTE PRODUCTO DEBE SER INSTALADO DE ACUERDO A LOS CODIGOS DE INSTALACION APLICABLES POR UNA PERSONA FAMILIARIZADA CON LA CONSTRUCCION Y OPERACION DEL PRODUCTO Y LOS PELIGORS RELACIONADOS. . Recomendamos la instalación por parte deun electricista profesional. .
PAGE 6
Instrucciones de Ensamblaje: 1.De manera cuidadosa desempaque todas las partes y piezas y coloquelas en un lugar de trabajo despe jado. 2.Con cuidado hale los cables desde la caja en el techo y permita que cuelgue la lámpara. 3.Inspeccione cuidadosamente los cables de la unidad de iluminacion. El CABLE NEUTRAL DE LA UNIDAD es blanco. El CABLE CALIENTE DE LA UNIDAD es negro. El CABLE TIERRA es verde. 4.