Assembly Instruction

ManualsBrandsWest Elm ManualsAccessoriesWest Elm Glass Link Chandelier

F F

assembly instructions

glass link chandelier

1748060

page 1 of 2

Warning:

·To reduce the risk of re, electrical shock or personal injury, always turn o lamp and allow it to cool prior to

replacing light bulb.

·Do not touch bulb when xture is turned on. Do not look directly at lit bulb.

·Keep ammable materials away from lit bulb.

Assembly Instructions:

1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE

MAIN FUSE BOX/CIRCUIT BREAKER.

2. Carefully unpack all xture parts and hardware and

lay out on a clear workspace.

3. Screw the pole (H) into the metal connector (G).

4. Screw the pole (I) into the pole (H).

5. Hang the hook (J) onto the pole (I) and tighten the

screw on the hook.

Parts Enclosed:

• (1) Mounting plate (D)

• (1) Canopy (E)

• (2) Metal connector (G)

• (2) Pole (H)

• (2) Hook (J)

• (2) Metal ring (K)

• (2) Metal frame (L,M)

• (208) Glass links (N) , including (6) extra

• (3) Socket (O)

• (4) Metal nut(P)

• (4) Steel Wire (R)

Hardware Included:

• (3) Plastic wire connectors (A)

• (1) Green ground screw (B)

• (2) Mounting screws (C)

• (2) Canopy screws (F)

Important Safety Instructions:

·These instructions are provided for your safety. It is important that they are read carefully and completely before

assembling xture.

•We strongly recommend that a professional electrician install all direct wire ﬁxtures.

·This xture has been rated for up to (3) 60-watt maximum TYPE A standard bulb (not included). To avoid the risk

of re, do not exceed the recommended wattage.

To install you will need:

• Electrical tape

• Screwdriver

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

·For your safety and convenience, assembly by two people is recommended

Summary of content (2 pages)

PAGE 1
glass link chandelier assembly instructions Important Safety Instructions: ·These instructions are provided for your safety. It is important that they are read carefully and completely before assembling fixture. •We strongly recommend that a professional electrician install all direct wire ﬁxtures. ·This fixture has been rated for up to (3) 60-watt maximum TYPE A standard bulb (not included). To avoid the risk of fire, do not exceed the recommended wattage.
PAGE 2
glass link chandelier assembly instructions 6. Carefully inspect the fixture wires. The NEUTRAL FIXTURE WIRE is white or marked “N”. The HOT FIXTURE WIRE is black or marked “L”. The yellow-green or bare wire is the GROUND WIRE. 7. Attach the GROUND WIRE from the fixture to the GROUND JUNCTION BOX WIRE from the outlet (usually green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure that no wire strands are exposed.