Assembly Instruction

hammered copper ﬂ oor mirror

mounting instructions

Page 1 of 35568720-02/04/08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

! Proper assembly of this item requires 2 people.

Parts:

Long Screw 2x

Drywall Toggle Anchor 2x

Mounting Plate 2x

Nylon Strap 1x

Small Screw 3x

Large Screw 2x

Anti Tip Kit

PAGE 1
hammered copper floor mirror mounting instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
hammered copper floor mirror 1. Using a pencil, mark the locations on the wall where the hangers will line up. This is where the hardware will be inserted. mounting instructions 2. Using a Philip’s head screwdriver, insert the drywall toggle anchors (A) into the wall at the insertion points. Press and turn clockwise until anchors are flush with the wall. C 3. Insert screws (B) into the anchors (C), leaving approximately 1/2” between the back of the screw head and the wall. B 4.
PAGE 3
hammered copper floor mirror mounting instructions NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this product. Attaching mirror to wall with anti-tip kit. 1. Determine where the mirror is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximatly 2” below the “D” ring on the back of the mirror frame. 2.