hicks dining table 60x36 assembly instructions A B bolt 16x C D rubber bumper 6x 9268806—04/07 levelers 4x allen key 1x Page 1 of 5
hicks dining table 60x36 assembly instructions ? 1. Insert bolt (A) through predrilled hole in bracket and into predrilled hole in leg panel as shown. Tighten using allen key (D).
hicks dining table 60x36 assembly instructions 2. Insert leveler (B) into predrilled hole in bottom of leg as shown. If neccessary, adjust by hand when leveling table on floor after completed table assembly.
hicks dining table 60x36 assembly instructions 3. Insert brackets on legS into openings in center panel as shown. Insert bolt (A) into predilled holes on bottom faces of center panel as shown. Tighten using allen key (D).
hicks dining table 60x36 assembly instructions 4. Insert rubber bumpers (C) into predrilled holes in top of center panel and legs as shown. Carefully set table top into place. PLEASE NOTE: GLASS TOP AND METAL FRAME ARE PACKED IN SEPERATE CARTONS C CARE INSTRUCTION Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth.
