Assembly Instruction

hudson low media console

assembly instructions

Page 1 of 2

8414914/ 8414880 / 8687907 - 08/06

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

short bolt 6x screw 8x

allen key 1x

long bolt 2x

8414914/ 8414880 - 08/06

CAUTION

The top shelf of this cart/stand is intended for use with:

Plasma/HD televisions having a maximum screen size

of 46 inches and weight of 135 lbs; or Tube televisions

having a maximum screen size of 27 inches and weight

of 135 lbs.

All other support shelves should not be loaded more

than 25 lbs.

DO NOT EXCEED RECOMMENDED LOAD. Use with

products heavier than the maximum sizes and weights

indicated may result in instability causing

possible injury.

PAGE 1
hudson low media console assembly instructions ! CAUTION The top shelf of this cart/stand is intended for use with: Plasma/HD televisions having a maximum screen size of 46 inches and weight of 35 lbs; or Tube televisions having a maximum screen size of 27 inches and weight of 35 lbs. All other support shelves should not be loaded more than 25 lbs. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury.
PAGE 2
hudson low media console assembly instructions 1. Before starting assembly, take out all accessories inside large bottom drawer. Then place the chest upside down on a smooth, scratch-free surface. 2. Attached each metal leg by aligning it on the pre-drilled holes underneath the chest . Insert bolts (A) into the leg beam as shown and tighten using the allen key (D). Then insert screws (B) into the plate and tighten using a phillips head screwdriver. 3.