Assembly Instruction

jay desk

assembly instructions

Page  of 68338550/ 8338568/8338576/930675 - 07/06

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

long bolt 8x medium bolt 4x

axle 2x

lock washer 2x

at washer 2x

allen and phillips wrench x

short bolt 2x

plastic pipe 2x

PAGE 1
jay desk assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
PAGE 2
jay desk assembly instructions 1. Fasten back legs to desk top using flat washer (F), lock washer (E), and long bolt (A) in order as shown. Tighten with allen wrench (G).
PAGE 3
jay desk assembly instructions 2. Fasten front legs to desk top using flat washer (F), lock washer (E), and medium bolt (B) in order as shown. Tighten with allen wrench (G).
PAGE 4
jay desk assembly instructions 3. Set wheel into leg as shown. wrench (G).
PAGE 5
jay desk assembly instructions 5. Fasten tray legs to top using flat washer (F), lock washer (E), and long bolt (A) in order as shown. Tighten with allen wrench (G).
PAGE 6
jay desk assembly instructions 6. The drawer handle has been attached inside the drawer for shipping. Remove 2 handle screws using philips side of wrench (F). Re-attach handle facing outside the drawer. Tighten screws with phillips wrench (G). G G CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.