Assembly Instruction

leather armless sectional corner

assembly instructions

Page 1 of 28775470 - 01.06.09

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

! Proper assembly of this item requires 2 people.

bolts M8 x 40mm 4x ﬂ at washer M8 4x

Hardware

screws 3.5 x 35mm 16x

PAGE 1
leather armless sectional corner assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people. Hardware A B bolts M8 x 40mm 4x flat washer M8 4x C screws 3.5 x 35mm 16x 8775470 - 01.06.
PAGE 2
leather armless sectional corner assembly instructions 1. Align the legs with the corners as shown, including the back corner. Insert bolt (A) and washer (B) through leg and into base. Tighten with supplied allen key. Insert 4 screws (C) through legs into base and tighten with phillips head screwdriver. DO NOT OVERTIGHTEN! B C A CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Leather seat: vacuum crevices regularly to remove dirt and dust.