Assembly Instruction

long hanging capiz pendant lamp

mounting instructions

8121089 - 05/06

! Tools required:

! BEFORE INSTALLATION:

Please note that these instructions are provided for your safety. It is very

important that they are read carefully and completely before beginning

the installation of the lamp. We strongly suggest that a qualied

electrician install all direct-wired xtures.

! Assembly requires two people.

! This xture is rated for two MAXIMUM 60-WATT type A bulbs. To

prevent the risk of re, do not exceed recommended wattage.

! Do not throw away packaging materials until assembly is complete.

wire cap 3x

mounting screw 2x

SHORT screw 5x

Page 1 of 2

PAGE 1
long hanging capiz pendant lamp mounting instructions ! Tools required: ! BEFORE INSTALLATION: Please note that these instructions are provided for your safety. It is very important that they are read carefully and completely before beginning the installation of the lamp. We strongly suggest that a qualified electrician install all direct-wired fixtures. ! Assembly requires two people. ! This fixture is rated for two MAXIMUM 60-WATT type A bulbs.
PAGE 2
long hanging capiz pendant lamp mounting instructions 1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER. 2. Carefully unpack all fixture parts and hardware and lay out on a clear workspace. 3. Fasten the mounting plate (a) into ceiling using 2 mounting screws (B). Be sure to fasten mounting plate into studs or a secured junction box. a B A C b 4. Screw together poles (c), metal expander (d), and canopy plate (b). Tighten by hand. c IF USING PORTABLE LAMP: 5.