Assembly Instruction

closed

* Base sold separately.

open

page 1 of 4

7641293/7641285/7641277 - 11/05

: metal umbrella

assembly instructions

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.

PAGE 1
: metal umbrella assembly instructions closed open * Base sold separately. ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.
PAGE 2
: metal umbrella assembly instructions 1. Depress pop latch in upper umbrella pole with thumb. Insert upper umbrella pole into lower pole. Once inserted be sure that pop latch engages one of the pre-drilled holes in the lower pole.
PAGE 3
: metal umbrella assembly instructions 2. Turn the handle in either a clockwise or counter-clockwise direction as shown to open umbrella. To close umbrella turn handle in the opposite direction.
PAGE 4
: metal umbrella assembly instructions 3. To tilt umbrella top, depress and hold tilt button and angle umbrella top to left or to the right until it locks in place. IMPORTANT: To avoid damaging your umbrella, be sure to return the umbrella top to its regular upright position before attempting to close it. CARE INSTRUCTION Always use an umbrella stand. Close umbrella in strong winds. Close umbrella when not in use. When not in use, store in a dry location. To clean umbrella: Brush to remove dirt and rust.