Assembly Instruction

narrow leg media stand

assembly instructions

Page 1 of 49692187 - 09/19/08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

PAGE 1
narrow leg media stand assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁnish.
PAGE 2
narrow leg media stand assembly instructions 1. Place Media Stand on a soft, non-marring surface. 2. Attach legs to Bottom Frame using Hex Nut (D), Spring Washer (C) and Flat Washer (B) as illustrated. 3. Insert center leg to bottom farme and turn clockwise to tighten.
PAGE 3
narrow leg media stand assembly instructions 4. Pull top drawer out and using a phillips head screwdriver unscrew the drawer hardware. Repeat for all drawers 5. Flip the hardware around to the front of the drawer, insert the screws from the back of the drawer front and tighten with the phillips head screwdriver. Repeat for all drawers. 6. Once the media stand is in place you may need to adjust the feet to accomodate uneven flooring or carpet.
PAGE 4
narrow leg media stand assembly instructions CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. nish, avoid the use of chemicals and household cleaners. CAUTION The top shelf of this cart/stand is intended for use with: Plasma/LCD/DLP/HD televisions having a maximum screen size of 45 inches and weight of 100 lbs; or Tube televisions having a maximum screen size of 24 inches and weight of 70 lbs. All other support shelves should not be loaded more than 25 lbs.