Assembly Instruction

ManualsBrandsWest Elm ManualsAccessoriesWest Elm Natural Capiz Pendant

assembly instructions

natural capiz pendant

1577428

page 1 of 2

Warning:

·To reduce the risk of re, electrical shock or personal injury, always turn o lamp and allow it to cool prior to

replacing light bulb.

·Do not touch bulb when xture is turned on. Do not look directly at lit bulb.

·Keep ammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

·For your safety and convenience, assembly by two people is recommended

Assembly Instructions:

1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE

BOX/CIRCUIT BREAKER.

2. Carefully unpack all xture parts and hardware and lay out on a

clear workspace.

3. Unscrew the socket ring (K) from the socket (H).

4. Place shade frame (I) onto the socket (H) then secure it by turning

the socket ring (K) in a clockwise direction.

3. Carefully inspect the xture wires. The NEUTRAL FIXTURE WIRE is

white or marked “N”. The HOT FIXTURE WIRE is black or marked “L”. The

yellow-green or bare wire is the GROUND WIRE.

Parts Enclosed:

• (38) Capiz shells (D) , including (2) extra

• (1) Mounting plate (E)

• (2) Canopy screws (F)

• (1) Canopy (G)

• (1) Socket (H)

• (1) Socket Ring (K)

• (1) Shade Frame (I)

Hardware Included:

• (2) Mounting screws (C)

• (1) Green ground screw (B)

• (3) Plastic wire connectors (A)

• (2) Canopy screws (C)

Important Safety Instructions:

·These instructions are provided for your safety. It is important that they are read carefully and completely

before assembling xture.

•We strongly recommend that a professional electrician install all direct wire ﬁxtures.

·This xture has been rated for up to (1) 60-watt maximum TYPE A standard bulb (not included). To avoid the

risk of re, do not exceed the recommended wattage.

To install you will need:

• Electrical tape

• Screwdriver

Summary of content (2 pages)

PAGE 1
natural capiz pendant assembly instructions Important Safety Instructions: ·These instructions are provided for your safety. It is important that they are read carefully and completely before assembling fixture. •We strongly recommend that a professional electrician install all direct wire ﬁxtures. ·This fixture has been rated for up to (1) 60-watt maximum TYPE A standard bulb (not included). To avoid the risk of fire, do not exceed the recommended wattage.
PAGE 2
natural capiz pendant assembly instructions 4. Attach the GROUND WIRE from the fixture to the GROUND JUNCTION BOX WIRE from the outlet (usually green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE, be sure to insert the green ground screw (B) into the mounting plate (E) facing DOWN, and wrap the fixture's bare ground wire around the ground screw.