* - 2 4 - 5 " " / ) ' & ! " " ! " " ' + ! ' " # & ' & ) ) % ' & ' " & " + " & " ' "
I J H K L K M H K 1. Attach bottom shelf (3) to the legs (2) with metal washers (A), lock washers (B), and bolts (C) as shown below. Tighten with allen key (D). Screw in center leg as shown. 1. Fixez l’étagère du bas (3) aux deux pieds déjà assemblés (2) avec les joints en métal (A), les joints de verrouillage (B) et les boulons (C) comme indiqué sur le schéma ci-dessous. Serrez à l’aide de la clef Allen (D). Vis dans les jambes, comme illustré. 1.
2. Place cabinet (1) on its top on a soft surface. Attach legs (2) with metal washers (A), lock washers (B), and bolts (C) as shown below. Tighten with allen key (D). 2. Placez le meuble (1) à l’envers sur une surface lisse et rembourrée. Fixez les pieds (2) avec les joints en métal (A), les joints de verrouillage (B) et les boulons (C) comme indiqué sur le schéma ci-dessous. Serrez à l’aide de la clef Allen. 2. Voltee el gabinete (1) y coloquelo sobre una superficie suave.
! Maximum load on each drop front door is 20 lbs. ! Poids maximum sur chaque porte abattante de devant : 20 pds = 9 Kg. ! Cuando las puertas estan abiertas, estas soportan una carga maxima de 20 lbs. 3. Rotate parsons buffet to its upright position. To open drop front doors pull on the door front as shown below. 3. Remettez votre Buffet Parsons droit. Pour ouvrir la porte abattante, poussez sur le haut et au milieu de la porte comme indiqué ci-dessous. 3. Voltee el parsons buffet a su posicion vertical.
! CAUTION The top shelf of this stand is intended for use wth: Plasma/LCD televisions having a maximum screen size of 40” and a weight of 80lbs. Tube televisions having a maximum screen size of 16” and weight of 35lbs. ! ATTENTION L’etagere superieure de ce meuble est concue pour porter: des televiseurs a plasma et LCD d’une taille d’ ecran maximile de 101.6 cm (40”) et d’un poids de 36.3 kg (80lbs). des televiseurs a tubes d’une taille d’une taille d’ecran maximale de 40.64 cm (16”) rt d’un poids de 15.
NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this product. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximately 1” below the top on the back of the piece of furniture. 2.